[除錯] 新電腦會自行重開機

看板hardware (電腦硬體)作者 (尋)時間16年前 (2009/09/02 12:44), 編輯推噓2(208)
留言10則, 3人參與, 最新討論串1/2 (看更多)
CPU:AMD Althon II 240 MB :MA785GPMT-UD2H RAM:威剛DDR3-1600 2G*2 VGA:內顯 HDD:WD 640G AAKS PSU:Be Quiet 400W (舊版非Deluxe) O.S:WinXP 32位元版 SP2 ﹝問題詳述﹞昨晚組好電腦後,在灌常用的程式過程中,重開機好幾次。我發現重開機的 時間點,我都正在同時做一堆事,如:一次開好幾個FTP從舊電腦抓東西過去 ,同時灌一堆有的沒的常用軟體... 另二次重開機是發生在我邊打BBO,邊抓FTP。 另外,昨天驗機時發現,剛開機顯示的記憶體時脈為1066非1600, 進BIOS後,工程師也不知道怎麼改...= = 回家後發現可以改為1600,不知道是不是因為我動了default記憶體設定值 所以容易重開機?? ﹝已做努力﹞試過用HD Tune掃硬碟是否有壞軌,發現一切正常。 今早睡覺前放燒機程式(Orthos)給他跑,結果剛剛發現電腦一直BB叫, Orthos視窗也顯示STOPPED(原本GO的地方),在splog檔案有看到error: Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15 CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.] CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.] 2009/9/2 上午 04:19 Launching 2 threads... 1:Using CPU #0 2:Using CPU #1 1:Beginning a continuous self-test to check your computer. 2:Beginning a continuous self-test to check your computer. 1:Press Stop to end this test. 2:Press Stop to end this test. 1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. 2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. 2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. 1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. 2:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length. 1:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length. 2:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length. 1:Torture Test ran 6 minutes 32 seconds - 0 errors, 0 warnings. 1:Execution halted. 2:Torture Test ran 6 minutes 32 seconds - 0 errors, 0 warnings. 2:Execution halted. Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15 CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.] CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.] 2009/9/2 上午 07:01 Launching 2 threads... 2:Using CPU #1 1:Using CPU #0 2:Beginning a continuous self-test to check your computer. 1:Beginning a continuous self-test to check your computer. 2:Press Stop to end this test. 1:Press Stop to end this test. 2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. 1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. 2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. 1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. 2:Torture Test ran 2 minutes 21 seconds - 0 errors, 0 warnings. 2:Execution halted. 1:Torture Test ran 2 minutes 21 seconds - 0 errors, 0 warnings. 1:Execution halted. Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15 CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.] CPU: 2812MHz FSB: 200MHz [200MHz x 14.0 est.] 2009/9/2 上午 07:12 Launching 2 threads... 1:Using CPU #0 2:Using CPU #1 1:Beginning a continuous self-test to check your computer. 2:Beginning a continuous self-test to check your computer. 1:Press Stop to end this test. 2:Press Stop to end this test. 1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. 2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. 2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. 1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. 2:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length. 1:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length. 2:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length. 1:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length. 2:FATAL ERROR: Rounding was 0.5, expected less than 0.4 2:Hardware failure detected, consult stress.txt file. 2:Torture Test ran 6 minutes 54 seconds - 1 errors, 0 warnings. 2:Execution halted. 1:Torture Test ran 6 minutes 54 seconds - 0 errors, 0 warnings. 1:Execution halted. 煩請各位版眾幫忙解答, 倘若真的不行,只好再抱回去給店家弄了...QQ -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 112.104.103.156 ※ 編輯: chriscloud 來自: 112.104.103.156 (09/02 13:05)

09/02 13:28, , 1F
這種穩定度的"新電腦",比我最近湊舊零件的P4 2.6 還慘...
09/02 13:28, 1F

09/02 13:29, , 2F
而且看起來非常嚴重,halt 就算了,連error 都出來了...
09/02 13:29, 2F

09/02 13:29, , 3F
不要動記憶體設定,維持 default 先跑看看吧...
09/02 13:29, 3F

09/02 13:30, , 4F
嗯...會當雞的電腦,送我我可能都要考慮... ^_^
09/02 13:30, 4F

09/02 13:32, , 5F
ㄨL我給外甥那台電腦最近回廠...
09/02 13:32, 5F

09/02 13:41, , 6F
但 我買的RAM本來就是1600,只是在開機時看到顯示為
09/02 13:41, 6F

09/02 13:42, , 7F
1033,所以才進BIOS改為1600,所以威剛的1600是騙人的
09/02 13:42, 7F

09/02 13:42, , 8F
嗎...@@a
09/02 13:42, 8F

09/02 13:48, , 9F
原PO先開CPU-Z看SPD資料在說吧....
09/02 13:48, 9F

09/02 14:09, , 10F
等晚上我回家之後會看的,謝樓上兩位建議 m(_ _)m
09/02 14:09, 10F
文章代碼(AID): #1AdVWlaD (hardware)
文章代碼(AID): #1AdVWlaD (hardware)