Re: [問題] 系統丟出了 g_vfs_done() 的 error

看板FreeBSD作者Seasonny (曉風殘月‥)時間17年前 (2008/07/09 23:16)推噓0(0推 0噓 0→)

留言0則, 0人參與討論串4/8 (看更多)

※ 引述《idiotmax (DucK-QuacK)》之銘言： : 我也有相類似的情況 : Jul 8 00:53:40 kernel: ad12: FAILURE - device detached : Jul 8 00:53:41 kernel: subdisk12: detached : Jul 8 00:53:41 kernel: ad12: detached : Jul 8 00:53:41 kernel: GEOM_RAID3: Device swap: provider ad12s1b : Jul 8 00:53:40 root: ZFS: vdev I/O failure, zpool=store path=/dev/ad12s1d offset=283550580736 error=6 : 這顆硬碟是WD640G 如果你的型號是WD 6400AAKS 那就跟我一樣 :P : 本來一開始是開機時可以正常抓到mount上去，運作中沒啥loading突然就消失了 hmm..症狀差不多有時候會突然消失 : 但是後來越來越慘，現在變成開機時就抓不到 mount root file system 的時候就卡住 : 然後直接抓不到 : 之前另外還有一顆硬碟WD320G也有相同的問題 : 本以為是硬碟有問題，所以就把320的拿到桌上型裝Windows來用 : 但是在Windows環境下都還蠻正常的，所以不知道是啥問題。以下是開機時 dmesg 所吐出來的 FreeBSD 7.0-STABLE #0: Wed Apr 16 19:00:22 CST 2008 root@some.where:/usr/obj/usr/src/sys/MYKERNEL Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3000+ (2009.79-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0xfc0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!> real memory = 1073676288 (1023 MB) avail memory = 1041326080 (993 MB) ACPI APIC Table: <Nvidia AWRDACPI> ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <Nvidia AWRDACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3fef0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 powernow0: <Cool`n'Quiet K8> on cpu0 device_attach: powernow0 attach returned 6 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <NVIDIA nForce3-250 AGP Controller> on hostb0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xea003000-0xea003fff irq 21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xea004000-0xea004fff irq 22 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 4 ports with 4 removable, self powered ehci0: <NVIDIA nForce3 250 USB 2.0 controller> mem 0xea005000-0xea0050ff irq 23 at device 2.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <NVIDIA nForce3 250 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 8 ports with 8 removable, self powered nve0: <NVIDIA nForce MCP7 Networking Adapter> port 0xa800-0xa807 mem 0xea000000-0xea000fff irq 21 at device 5.0 on pci0 nve0: Ethernet address 00:11:09:65:77:14 miibus0: <MII bus> on nve0 e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nve0: using obsoleted if_watchdog interface nve0: Ethernet address: 00:11:09:65:77:14 nve0: [ITHREAD] pci0: <multimedia, audio> at device 6.0 (no driver attached) atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f,0xd000-0xd07f irq 23 at device 9.0 on pc atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe400-0xe40f,0xe800-0xe87f irq 20 at device 10.0 on p atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xe4000000-0xe4ffffff,0xe6000000-0xe7ffffff irq 16 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci2: <ACPI PCI bus> on pcib2 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x9000-0x903f mem 0xe9101000-0xe9101fff,0xe9000000-0xe90fffff irq 17 at device 7.0 on pci2 miibus1: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> PHY 1 on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:d0:b7:c5:c1:67 fxp0: [ITHREAD] pci2: <serial bus, FireWire> at device 12.0 (no driver attached) sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc97ff,0xcc000-0xcffff,0xd0000-0xd17ff,0xd2000-0xd37ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled NULL mp in getnewvnode() Timecounter "TSC" frequency 2009793991 Hz quality 800 Timecounters tick every 1.000 msec ad0: 152627MB <Seagate ST3160023A 8.01> at ata0-master UDMA100 acd0: CDRW <SONY CD-RW CRX320E/NYK4> at ata1-master UDMA33 ad4: 610480MB <WDC WD6400AAKS-22A7B0 01.03B01> at ata2-master SATA150 Trying to mount root from ufs:/dev/ad0s1a WARNING: /DARK was not properly dismounted /DARK: mount pending error: blocks 611616 files 1 WARNING: /DARK was not properly dismounted ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 6400AAKS WARNING: attempt to net_add_domain(netgraph) after domainfinalize() 大概這樣… Seagate ST3160023A 是系統硬碟 WD 6400AAKS 兩個月前掛上去的最近開始出亂子有在想說有空時把它送修了… =_="" 謝啦! -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 220.134.89.113 ※ 編輯: Seasonny 來自: 220.134.89.113 (07/09 23:16) ※ 編輯: Seasonny 來自: 220.134.89.113 (07/09 23:17)