Re: [問題] N社打死不支援1366x768解析，請大家幫쀠…

看板VideoCard (顯卡板)作者wahaha99 (成為鄉民中道的力量)時間18年前 (2007/05/06 16:06)推噓6(6推 0噓 2→)

留言8則, 6人參與討論串1/1

※ 引述《wowtiger (小虎)》之銘言： : 光這點ATI就輸了很久了 : NVIDIA的驅動程式早在三四年前就有一個功能叫自訂解析度 : 當然有些人會遇到無法新增的問題 : 這必須要用移除工具完全移除再重新安裝才行 : 而且NVIDIA自由的在可以自訂特殊的市面上不會出現的解析度 : 當然你的螢幕廠商有沒有把EDID寫好都是重點 : 一般而有EDID裡面有該解析度的資料 : 驅動程式就會幫你抓出來 : 不過看樣子是液晶螢幕本身的EDID沒有寫好 : http://en.wikipedia.org/wiki/Extended_display_identification_data A major limitation of EDID is that it cannot express the native resolutions of the most common wide screen flat panel displays and liquid crystal display televisions. The number of horizontal pixels must be a multiple of 8. The number of vertical pixels is calculated from the horizontal resolution and the selected aspect ratio. To be fully expressible, the size of wide screen display must thus be a multiple of 16×9 pixels. For 1366×768 pixel Wide XGA panels the nearest resolution expressible in the EDID syntax is 1360×765 pixels. Specifying 1368 pixels as the screen width would yield an unnatural screen height of 769.5 pixels. Many Wide XGA panels do not advertise their native resolution, instead offering only a resolution of 1280×768. Some panels advertise a resolution only slightly smaller than the native, such as 1360×765. For these panels to be able to show a pixel perfect image, the EDID data must be ignored by the display driver. Special programs are available to override the EDID data; PowerStrip for Microsoft Windows and DisplayConfigX for Mac OS X 照這樣看起來....不是EDID沒寫好....是他的先天限制 (有沒有搞錯啊) 不過我用N社的卡也沒法調整耶我用強迫調整為 1366*768 硬是會跳回1368*769 我的顯示卡是 6200TC 螢幕是VITO32 -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 218.166.61.191 ※ 編輯: wahaha99 來自: 218.166.61.191 (05/06 16:13)