[問答] 不同廠牌的Lacp怎麼連
我現在有兩台Switch : Juniper EX4200 , Cisco 3750
Juniper設定如下:
set interfaces ae1 aggregated-ether-options lacp active
set interfaces ae1 unit 0 family ethernet-switching port-mode trunk
set interfaces ge-0/0/2 description to_C1803_port9/10
set interfaces ge-0/0/2 ether-options 802.3ad ae1
set interfaces ge-0/0/3 description to_C1803_port9/10
set interfaces ge-0/0/3 ether-options 802.3ad ae1
cisco 設定如下 :
int range f1/0/3 - 4
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 2 mode active
int po2
switchport trunk encapsulation dot1q
switchport mode trunk
我拿兩條線互連
發現兩邊的Link狀態都是down
請問要怎麼做才能讓不同的廠牌的Lacp互通
謝謝回答
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 202.133.227.34
推
08/14 23:32, , 1F
08/14 23:32, 1F
→
08/15 01:39, , 2F
08/15 01:39, 2F
推
08/15 08:15, , 3F
08/15 08:15, 3F
→
08/15 08:15, , 4F
08/15 08:15, 4F
→
08/15 08:16, , 5F
08/15 08:16, 5F
Network 近期熱門文章
PTT數位生活區 即時熱門文章
7
20