[除錯] 無法跑完windows

看板hardware (電腦硬體)作者 (隨風起飛)時間16年前 (2009/06/14 00:24), 編輯推噓0(004)
留言4則, 3人參與, 最新討論串1/2 (看更多)
﹝硬體規格﹞CPU:Intel Celerone 2600 MB :Asus P4BGV-MX-TAYZ RAM:Veritech DDR400 512MB VGA:Asus 主機板上的 HDD:Maxator 120G PSU:FRD LC-B-350ATX 350W O.S:windows xp professional, sp2 ﹝問題詳述﹞某天電腦要開機的時候就變成現在這樣. 開機時自動進入BIOS,要先選CPU的時脈 (manual or 2600) 後來進入windows畫面,大概過五秒後出現藍畫面+以下敘述 A problem has been described and windows has been shut down to prevent damage to your computer. Unmountable_boot_volume If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If the problem continue, disable or remove any newly installed hardware or software. Disable BIOS memry options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe modes. STOP:0x000000ED (0x81F9c480, 0xC0000032, 0x00000000, 0x00000000) ﹝已做努力﹞因為沒有新安裝任何硬體,所以只嘗試了換ram,但是仍然無法改善 這條ram拿到其他電腦用也ok! 也沒有新裝軟體. 有大概清一下電腦內部 可以麻煩大家幫我看看嗎? 謝謝^^~ ※ 編輯: ymme 來自: 59.112.194.6 (06/14 00:25)

06/14 01:49, , 1F
好像是硬碟的問題~查看看有沒有壞軌巴~應該壽終正寢囉!
06/14 01:49, 1F

06/14 10:28, , 2F
沒裝新硬體進安全模式把不必要軟體關掉...
06/14 10:28, 2F

06/14 12:56, , 3F
嗯~我有嘗試要進安全模式,但是進不去.就又卡在藍畫面
06/14 12:56, 3F

06/15 02:26, , 4F
檢查系統有無短路或鬆脫
06/15 02:26, 4F
文章代碼(AID): #1ACzBFPi (hardware)
文章代碼(AID): #1ACzBFPi (hardware)