[心得] 硬碟變成動態磁碟要轉回基本的作法(XP)

看板Storage_Zone (儲存裝置)作者anedo (鷲嶺之魂)時間15年前 (2010/09/03 08:47)推噓3(3推 0噓 1→)

留言4則, 3人參與討論串1/2 (看更多)

作業系統是XP。開機執行spfdisk，若發現要修改的動態磁碟系統ID是42。 (42.動態磁碟)把42改回07即可。日前因為這樣抓回一顆1TB的資料。能印證一次網路上看來的作法，也把這個經驗分享給大家。另外一招是用2000&XP&2003光碟內的Dskprobe.exe 查詢/動態硬碟最早那篇m文就是解決方法。 -----------------------以下是網路搜尋他板文章之翻譯---------------------- 作者: jackoptt (燎原火) 看板: share 標題: [資訊] 動態硬碟轉換成基本硬碟 (中譯) 時間: Thu Feb 9 14:21:43 2006 ※ 引述《jackoptt (燎原火)》之銘言： : Convert from Dynamic Disk to Basic Disk without data loss : Windows 2k and above introduce new kind of disk: Dynamic disk. Dynamic Disks : provice features that basic disks do not such as ability to create volumes : that span multiple disk and ability to create fault tolerant volumes. All : volume in dynamic disks are known as dynamic volumes. : We can convert from basic disk to dynamic disk very easily by using Disk : Management tool. But that tool did not allow convert from dynamic disk to : basic disk without data loss. : One day, I had a serious problem: after re-installed Windows 2003 Server, a : dynamic disk could not be recognized. Fortunately, I found in Internet an : article about this problem: : 1) Install dskprobe.exe on the system. (This is one of the utilities in the : Windows 2000 support tools on the install CD, and can be installed by simply : copying the .exe file to the hard drive.) : 2) Run dskprobe.exe on the system. : 3) Select the Drives menu and "Physical Drive. . ." : 4) Double click on the drive that you want to convert back to a basic disk. : Click the "Set Active" button next to that drive. : 5) From the Sectors menu, select "Read" : 6) Accept the defaults (begin sector 0, read 1 sector) and click "Read" : 7) In the editor, go to the "01C0" line and the third bit should be a "42". : Change that to a "07". **Note, a few machines have had this on the "01D0" : line instead. I don't know what that means, so I wouldn't try it unless it is : on a pure test box. (this line will be 01D0 if your disk has multiple : partitions and so on). : 8) From the Sectors menu, select "Write". Confirm all dialog boxes. **Note: : This is the step that will hose your box if you have not followed the above : instructions correctly.** : 9) Exit dskprobe.exe. Reboot : 10) Run chkdsk on the affected logical drive(s). If any errors are found, do : a chkdsk /f to fix them. Done. : Source from: http://faq.arstechnica.com/link.php?i=1806 在資料無損失的狀況下將動態磁碟轉換成基本磁碟在Windows 2000及更新的作業系統引進了一種新的技術: 動態磁碟. 動態磁碟提供了許多基本磁碟所不具有的功能,如"跨距磁碟區"和具有"容錯"功能的磁碟區. 而動態磁碟上的磁碟區都為視為動態磁碟區. 我們能輕易的使用"磁碟管理工具"將基本磁碟轉換成為動態態磁碟, 但它不能在資料無損失的狀況下將動態磁碟轉換成基本磁碟. 有一天,一個嚴重的事情發生了: 在重新安裝Windows 2003之後,系統並不能辦識原先的動態磁碟. 幸運地, 我在網路上發現一個解決的方案. 1) 安裝 dskprobe.exe 到系統上 (在Windows 2000的光碟上可以找到這個工具, 並具將它複製到硬碟上即可.) 下載點: http://0rz.net/3c12v 2) 執行 dskprobe.exe 3) 點選選單 Drives - Physical Drive... 4) 點兩下你想要轉換成基本磁碟的磁碟機. 並點選其右邊的"Set Active". 5) 點選選單 Sectors - Read. 6) 接受預設選項(Sector0至Sector1), 並點選"Read" 7) 在編輯器中, 至"01C0"行之笫三個位元應為"42", 將其改為"07" **附註:在某些電腦上,它出現在"01D0"行. 目前尚不知為何會如此, 所以我只在單純的電腦上測試它"***** 8) 點選選單 Sectors - Write, 確認所有的提示視窗 **附註:如果未完全的執行以上的步驟, 將有可能傷害你的電腦***** 9) 離開dskprobe.exe, 並重新開機. 10)對轉換的磁碟執行chkdsk, 若發現任何錯誤,執行 chkdsk /f 來修復它. 大功告成. 翻的不好, 大家參考看看吧. -- CPU:Q9550 VGA:MSI GTX295 MB :ASUS P5Q Premium MON:HANNspree HF287Hx2 RAM:A-DATA DDR2 2G*4 KB :Enermax KB007U-B HDD:WD640G+FALS*4 MU :Razer salmosa CASE:冰山戰神旗艦4G 預定完成的機器.. PSU:CM 1000W gold -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 210.66.227.85