Re: [請益] 超外頻嘗試方向

看板OverClocking (超頻)作者 (ooxx)時間7年前 (2017/04/09 23:53), 7年前編輯推噓2(2017)
留言19則, 3人參與, 最新討論串2/2 (看更多)
要講得太多還是直接回一篇 我沒買APU.不過看到吃土雞就知道了 A10-7860k:3.6G---4.0G Socket FM2+,support for PCIe 3.0 four CPU cores based on the Steamroller microarchitecture eight Compute Units based on GCN 2nd gen microarchitecture CPU:吃土雞架構 GPU:Sea Islands 最白話的講法:拉FSB/Bclk會動到HTT,NB,RAM,Igpu 以上皆可用除頻方式增減頻率.Igpu是怎樣除頻法我就不知道了 超頻就是先不動除頻.電壓硬幹先.這樣才會獲得最高效能 ram直接設1.65V以上好嗎.然後其他直接+0.1V拜託 想超頻就是要接受耗電爆炸.尤其是吃土雞核心的.超核爆 如果加壓都不行再來調除頻跟ram timing 你的是K版.所以可以直接拉倍頻.那htt,nb,ram ,igpu都不會連動 超不上去就是電壓硬幹了沒別招 再來如果你有注意看我po給你的網頁 RAM-Overclocking: Like I have already mentioned the iGPU benefits significantly from higher memory frequencies. 1866 MHz are usually no problem with stock voltages – given that the memory kit is working at this speed. I’m using a 2 x 2 GiB G.Skill Pi Kit with 2400 MHz on 1,65 Volt. The timings are 9-11-9-28.However if I increase the memory speed to 2133 MHz or higher, the sytem would not boot anymore and the post LED would show 51 which is a memory issue according to the mainboard manual.so what do we do ? My CPU requires to raise the NB-Voltage for 2133 MHz or higher. I had to use 1,2875 Volt to get the system running. Of course this depends on the CPU and you have to test step by step. 剛好作者也是拿Gigabyte的板子.你可以試試看.還有可以按Ctrl+F1看有啥隱藏選項 ※ 編輯: pold123 (59.104.163.195), 04/09/2017 23:56:31 ※ 編輯: pold123 (59.104.163.195), 04/10/2017 00:05:50

04/10 00:11, , 1F
改成uefi了之後ctrl-f1好像也沒用了
04/10 00:11, 1F

04/10 00:13, , 2F
很久沒摸到G牌的板子了.隱藏選項被改了喔
04/10 00:13, 2F

04/10 00:17, , 3F
我的板子超外頻下去就算只有1 d-sub就會掛掉就乾脆
04/10 00:17, 3F

04/10 00:17, , 4F
不動外頻
04/10 00:17, 4F

04/10 00:18, , 5F
不然cpu只能超到3.9 之後電到1.475v 只有4.2跑P95
04/10 00:18, 5F

04/10 00:18, , 6F
也會錯誤 幫QQ
04/10 00:18, 6F

04/10 00:27, , 7F
我以為FM2+會比較好超說.手上FX8跑4.5G@1.3V過P95
04/10 00:27, 7F

04/10 00:30, , 8F
再上去M5A97 r2.0就撐不住了.只能5G低負載自爽
04/10 00:30, 8F

04/10 00:36, , 9F
我是FM2的A8-5600K
04/10 00:36, 9F

04/10 12:36, , 10F

04/10 12:36, , 11F
我只要一動到電壓 就會開機無畫面
04/10 12:36, 11F

04/10 12:36, , 12F
重開機就這畫面 已試了一早
04/10 12:36, 12F

04/10 12:36, , 13F
電壓都照著p大的直接加大
04/10 12:36, 13F

04/10 12:36, , 14F
也照著網頁弄了一早上
04/10 12:36, 14F

04/10 12:36, , 15F
弄到都懷疑到底是我問題
04/10 12:36, 15F

04/10 12:36, , 16F
還是天生電腦爛
04/10 12:36, 16F

04/10 12:36, , 17F
先感謝p大w大熱心教導
04/10 12:36, 17F

04/10 12:36, , 18F
祝你們中大樂透 中了在吃個紅
04/10 12:36, 18F

04/10 12:36, , 19F
直接升電腦就不用煩惱超頻了 回
04/10 12:36, 19F
文章代碼(AID): #1OwbZyRN (OverClocking)
文章代碼(AID): #1OwbZyRN (OverClocking)