[問題] VHDL dip switch 呈現七段顯示器
利用Dip0~5 輸入BCD碼 然後七段顯示顯示結果
EX:11111 =>31
00001 =>1
00010 = 2
00011 = 3
00100 = 4
00101 = 5
00110 = 6
00111 = 7
01000 = 8
01001 = 9
01010 = 10
01011 = 11
01100 = 12
01101 = 13
01110 = 14
01111 = 15
10000 = 16
10001 = 17
10010 = 18
10011 = 19
10100 = 20
10101 = 21
10110 = 22
10111 = 23
11000 = 24
11001 = 25
11010 = 26
11011 = 27
11100 = 28
11101 = 29
11110 = 30
11111 = 31
這段程式碼要怎樣改加入呢
SEGMENT <= "00000" when "0000", --0
還要再用if DIP(4 downto 0) = "00000" then SEGMENT <= "00000" when "0000",
--0
是這樣嗎
如果是的話 以下31種都是用這種方法嗎
那要加在哪邊呢
謝謝 對VHDL還是不太熟呀
--****************************************
--* Counter From 00 To 31 And Display *
--* In Scanning Seven Segment LED *
--* Filename : SEGMENT_COUNT_00_23.VHD *
--****************************************
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
entity SEGMENT_COUNT_00_31 is
Port ( CLK : in std_logic;
RESET : in std_logic;
POINTER : out std_logic;
ENABLE : out std_logic_vector(6 downto 1);
SEGMENT : out std_logic_vector(6 downto 0));
end SEGMENT_COUNT_00_23;
architecture Behavioral of SEGMENT_COUNT_00_23 is
signal COUNT_24 : std_logic;
signal CLEAR : std_logic;
signal SCAN_CLK : std_logic;
signal COUNT_CLK : std_logic;
signal POSITION : std_logic_vector(6 downto 1);
signal DIVIDER : std_logic_vector(24 downto 1);
signal COUNT_BCD : std_logic_vector(7 downto 0);
signal DECODE_BCD : std_logic_vector(3 downto 0);
begin
--***************************
--* Time Base Generation *
--***************************
process (CLK,RESET)
begin
if RESET = '0' then
DIVIDER <= "000000000000000000000000";
elsif CLK'event and CLK = '1' then
DIVIDER <= DIVIDER + 1;
end if;
end process;
SCAN_CLK <= DIVIDER(15);
COUNT_CLK <= DIVIDER(24);
--**********************************
--* Counter Range From 00 to 31 *
--**********************************
process (COUNT_CLK,CLEAR)
begin
if CLEAR = '0' then
COUNT_BCD <= "00000000";
elsif COUNT_CLK'event and COUNT_CLK = '1' then
if COUNT_BCD(3 downto 0) = "1001" then
COUNT_BCD(3 downto 0) <= "0000";
COUNT_BCD(7 downto 4) <= COUNT_BCD(7 downto 4) + 1;
else
COUNT_BCD(3 downto 0) <= COUNT_BCD(3 downto 0) + 1;
end if;
end if;
end process;
CLEAR <= RESET and COUNT_24;
COUNT_24 <= '0' when COUNT_BCD(7 downto 0) = "00100100" else '1';
--*********************************************
--* Decide Seven Segment's Display Location *
--*********************************************
process (SCAN_CLK,RESET)
begin
if RESET = '0' then
POSITION <= "111110";
elsif SCAN_CLK'event and SCAN_CLK = '1' then
POSITION <= "1111" & POSITION(1) & POSITION(2);
end if;
end process;
ENABLE <= POSITION;
--*********************************************
--* Decide Seven Segment's Display Location *
--*********************************************
process (POSITION,COUNT_BCD)
begin
case POSITION is
when "111110" => DECODE_BCD <= COUNT_BCD(3 downto 0);
when "111101" => DECODE_BCD <= COUNT_BCD(7 downto 4);
when others => null;
end case;
end process;
--***********************************
--* BCD To Seven Segment Decoder *
--***********************************
with DECODE_BCD select
SEGMENT <= "1000000" when "0000", --0
"1111001" when "0001", --1
"0100100" when "0010", --2
"0110000" when "0011", --3
"0011001" when "0100", --4
"0010010" when "0101", --5
"0000010" when "0110", --6
"1111000" when "0111", --7
"0000000" when "1000", --8
"0010000" when "1001", --9
"1111111" when others;
POINTER <= '1';
end Behavioral;
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 122.127.49.48
推
11/17 22:01, , 1F
11/17 22:01, 1F
PLT 近期熱門文章
PTT數位生活區 即時熱門文章
