[問題]網路卡設定的問題

看板FreeBSD作者ziway.時間20年前 (2005/06/21 02:01)推噓0(0推 0噓 0→)

留言0則, 0人參與討論串1/1

小弟參考這篇 http://bsdvault.net/sections.php?op=viewarticle&artid=98 試著實作 Bundling network interfaces with ng_one2many 我將原先 rc.conf 中的 defaultrouter="123.456.789.254" ifconfig_xl0="inet 123.456.789.204 netmask 255.255.255.0" 註解掉改成在 rc.local 中加入 /sbin/ifconfig xl0 up /sbin/ifconfig xl1 up /sbin/kldload /modules/ng_ether.ko /usr/sbin/ngctl mkpeer xl0: one2many upper one /usr/sbin/ngctl connect xl0: xl0:upper lower many0 /usr/sbin/ngctl connect xl1: xl0:upper lower many1 /usr/sbin/ngctl msg xl1: setpromisc 1 /usr/sbin/ngctl msg xl1: setautosrc 0 /usr/sbin/ngctl msg xl0:upper setconfig "{ xmitAlg=1 failAlg=1 enabledLinks=[ 1 1 ] }" /sbin/ifconfig xl0 inet 123.456.789.204 netmask 255.255.255.0 /sbin/route add default 123.456.789.254 但是在檢查 dmesg | grep xl0 時會看到 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xc000-0xc07f mem 0xed000000-0xed00007f irq 11 at device 7.0 on pci1 xl0: reset didn't complete xl0: Ethernet address: 00:0a:5e:51:f5:75 miibus0: <MII bus> on xl0 xl0: reset didn't complete xl0: DAD detected duplicate IPv6 address fe80:0001::020a:5eff:fe51:f575: NS in/out=1/1, NA in=0 xl0: DAD complete for fe80:0001::020a:5eff:fe51:f575 - duplicate found xl0: manual intervention required dmesg | grep xl1 xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xc400-0xc47f mem 0xed001000-0xed00107f irq 10 at device 8.0 on pci1 xl1: Ethernet address: 00:0a:5e:41:90:87 miibus1: <MII bus> on xl1 xl1: promiscuous mode enabled 依照網頁上的測試方式似乎是有成功但是有 xl0: reset didn't complete 這樣的訊息想請教為什麼會出現這訊息或是有沒大大實作過可以分享一下經驗感謝^^ -- ※Origin：星情小築 < Star.leobbs.net > ※From： 59-105-117-147.adsl.dynamic.seed.net.tw