PPPoE的順序？

看板FreeBSD作者tabris.時間21年前 (2004/11/07 04:32)推噓0(0推 0噓 0→)

留言0則, 0人參與討論串1/1

作者: tabris (Tabris) 看板: BSD 標題: PPPoE的順序？時間: Sun Nov 7 03:17:27 2004 小弟各有一台FreeBSD和WinXP 兩台共接在一個switch HUB上然後再接到ATU-R 兩台機器都有設定PPPoE 如果FreeBSD先撥號的話，WinXP就會無法撥號除非把BSD那台的線先拔掉，等XP撥好完再接上才能夠兩台同時撥號小弟自己家和兩位接法和我一樣的朋友都有這樣的問題請問這個該如何解決呢？ /etc/rc.conf kern_securelevel_enable="NO" linux_enable="YES" moused_enable="YES" nfs_reserved_port_only="YES" sendmail_enable="YES" sshd_enable="YES" usbd_enable="YES" ifconfig_vr0="inet 192.168.0.132 netmask 255.255.255.0" defaultrouter="192.168.0.1" inetd_enable="NO" hostname="xuanfreebsd.no-ip.org" ppp_enable="YES" ppp_mode="ddial" ppp_net="YES" ppp_profile="Hinet" ppp_user="root" pppoed_enable="YES" pppoed_interface="vr0" =============================================================== /etc/ppp/ppp.conf: default: #set log Phase Chat LCP IPCP CCP tun command #ident user-ppp VERSION (built COMPILATIONDATE) # Ensure that "device" references the correct serial port # for your modem. (cuaa0 = COM1, cuaa1 = COM2) #set device /dev/cuaa1 #set speed 115200 #set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" #set timeout 180 # 3 minute idle timer (the default) disable lqr deny lqr enable dns # request DNS info (for resolv.conf) Hinet: set device PPPoE:vr0 set mtu 1492 set mtu 1492 set authname 84657790@hinet.net set authkey 08000236 set speed sync set dial set login set ifaddr 10.0.0.1/0 10.0.0.2/0 add default HISADDR nat enable yes log Phase Chat LCP IPCP CCP tun command -- ※ Origin: 臺大電機 Maxwell 站 ◆ From: 61-217-224-215.dynamic.hinet.net -- ※ Origin: 臺大電機 Maxwell 站 ◆ From: 61-217-224-215.dynamic.hinet.net