[問題] 關於Hypermesh_Optistru 記憶體配置
#先說明一下電腦配備
AMD Phenom(tm) 9850 2.51GHZ
4核心
8G記憶體
系統為X64
#模型的 element 約有四十幾萬個，網格大小約十幾公厘
做的分析為 Frequency Responce
結果他出線的錯誤訊息如下:
ERROR # 7007 FROM SUBROUTINE check_mem
The run failed because automatic memory expansion has failed.
Currently allocated working storage is 1011 MB.
Automatic expansion failed to expand to 2143 MB.
The failed amount is the minimum required memory to complete the run.
Please verify whether the system has enough memory. If it has, then please
try this run with the fixed memory allocation to avoid a probable limitation
on the maximum locatable memory with the automatic memory allocation.
***** NOT ENOUGH MEMORY ERROR *****
我記憶體明明就有8G，可是還是不能跑....
從他的錯誤訊息應該是記憶體配置問題
請問有高手能教我如何解決這問題嗎 @@?
感謝各位的指教阿!!
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 140.112.27.107
→
11/10 14:50, , 1F
11/10 14:50, 1F
Cad_Cae 近期熱門文章
PTT數位生活區 即時熱門文章
7
12
